Basic Instructions

1) TURN ON THE MEDIA SYSTEM

  1. Press the POWER button, then ON
  2. Status bar will progress while system warms up
  3. Lower the projection screen (may be manual or electric)

    panel 1

    2) SELECT A SOURCE

    1. Press a source button (LAPTOP/DVD/VCR, etc.)
    2. Connect laptop or insert necessary media (DVD/VHS, etc.)
    3. If using a laptop, be sure to choose  (Wall, Rack or Backup) VGA or (Wall or Rack) HDMI depending on how you connected
    4. NOTE:  VGA cables can be found in the rack drawer located in the cabinet or black box

      panel 2

    3) ADJUST VOLUME

    1. Press VOLUME button, then use ARROWS up/down
    2. Be sure that MUTE is not highlighted
    3. NOTE:  This controls volume from ALL sources. Remember to check volume on your laptop

      panel 3

      4) TURN OFF THE SYSTEM AFTER USE:

        1. Press the POWER button, then OFF
        2. Status bar will progress while system cools down
        3. Return the projection screen to the raised position
        4. NOTE:  During this two minute cool down process, system restart cannot occur

          5) QUESTIONS OR EQUIPMENT PROBLEMS?

            1. For immediate assistance, please call CTS at (617) 353-3227
            2. Send an email to classrooms@bu.edu to report equipment issues
            3. To request service, please complete our request form.