CGS-511 Projection

Quick Start Operating Instructions

1) TURN ON THE MEDIA SYSTEM

  1. In the projection booth, turn on the projector using the  I/O button.
    CGS-511-1
  2. Projector takes about a minute to warm up.
  3. Lower the manual projection screen at the front of the room.

2) SELECT A SOURCE

  1. Press INPUT button to cycle through inputs.
  2. Connect laptop or insert necessary media (DVD/Laserdisc, etc.).
    CGS-511-2
This classroom is not readily equipped for VHS projection.  If you require projection of a VHS video tape, please contact Classroom Technology Services at (617) 353-3227.

3) ADJUST VOLUME

  1. Use the VOLUME knob on the wall to control Program Volume.

This controls volume from ALL sources.  Remember to check volume on your laptop

4) TURN OFF THE SYSTEM AFTER USE

  1. In the projection booth, turn off the projector by holding down the I/O button for three seconds.

During this cool-down process, system restart cannot occur.

5) QUESTIONS OR EQUIPMENT PROBLEMS?

  • For immediate assistance, please call CTS at (617) 353-3227
  • Send an email to classrooms@bu.edu to report equipment issues.