CGS-505: Crestron CT-1000 Control Panel

Quick Start Operating Instructions

1) TURN ON THE MEDIA SYSTEM

  1. Press the POWER button, then ON.
    CGS-505-1
  2. The system’s warm-up progress bar will appear.

The white wall behind the chalkboard doubles as a projection screen.

2) SELECT A SOURCE

  1. Press a source button (COMP/VCR/LD etc.)
  2. Connect laptop or insert necessary media (DVD/VHS, etc.)

DVDs can be shown through the Laserdisc Player by selecting the LD input on the Crestron control panel.  DVDs can also be shown through your laptop using the COMP input (please be sure your laptop is connected with the VGA cable and that the 1/8” audio cable is also connected).

3) ADJUST VOLUME

  1. Press VOLUME button, then use the UP/DOWN arrows.
    CGS-505-2
  2. Be sure that MUTE is not highlighted.

This controls volume from ALL sources.  Remember to check volume on your laptop

4) TURN OFF THE SYSTEM AFTER USE

  1. Press the POWER button, then OFF.
  2. Status bar will progress while system shuts down.

During this cool-down process, system restart cannot occur.

5) QUESTIONS OR EQUIPMENT PROBLEMS?

  • For immediate assistance, please call CTS at (617) 353-3227
  • Send an email to classrooms@bu.edu to report equipment issues.