CGS-129: Crestron TPS-6L Control Panel

Quick Start Operating Instructions

cgs-129-1

1) TURN ON THE MEDIA SYSTEM

  1. Touch the screen to activate. Press the COMPUTER tab
  2. The system’s warm-up progress bar will appear

The white wall behind the chalkboard doubles as a projection screen.

2) SELECT A SOURCE

  1. Press the COMPUTER tab.
  2. Select a source (Rear Stage HDMI, Front Stage VGA, etc.)
  3. Connect laptop.
  4. To use the Podium Computer, select Rear Stage VGA.
    cgs-129-2

DVDs can be shown through your laptop.  CGS-129 is not readily equipped for VHS projection.  If you require projection of a VHS video tape, please contact Classroom Technology Services at (617) 353-3227.

3) ADJUST VOLUME

  1. Adjust VOLUME level using the volume UP/DOWN arrows.
  2. Be sure that MUTE is not highlighted.

Speech Volume controls podium and wireless microphone; Program Volume controls Computer and DVD audio.  Remember to check volume on your laptop and ensure it is not muted.

4) TURN OFF THE SYSTEM AFTER USE

  1. Press the SYSTEM POWER tab.
  2. Press the OFF button.
  3. Confirm that you would like to shut down the system by selecting YES.
    cgs-129-3
  4. System cool-down progress bar will appear.

During this 60 to 70-second cool-down process, system restart cannot occur.

5) QUESTIONS OR EQUIPMENT PROBLEMS?

  • For immediate assistance, please call CTS at (617) 353-3227
  • Send an email to classrooms@bu.edu to report equipment issues.