|
|
 |
Set Up The Encoding System
- Connect the audio and video feeds. These will be coming from
either a camera or mixing board, depending on how you are producing
the webcast.
- Start the Producer Plus software by clicking the start button.
Check the audio level (indicators should be in bright green, occasional
red but not peaking solid red). Adjust if needed by either using
the mixer (if you have one) or the system sound volume.
- Check the video for brightness. Adjust if needed by going to Options | Video
capture settings | Video source | Video settings.
- If there's no video, make sure you have selected the correct source (S-video
vs. Composite). If there's no audio, make sure the line in is plugged into
the mic port completely.
- After you've webcast a minute or two, stop the encoder and play
the test file locally. Pay particular attention to the audio quality.
|
